Ncurses

Ncurses函数列表

ncurses_addch - Add character at current position and advance cursor

ncurses_addchnstr - Add attributed string with specified length at current position

ncurses_addchstr - Add attributed string at current position

ncurses_addnstr - Add string with specified length at current position

ncurses_addstr - Output text at current position

ncurses_assume_default_colors - Define default colors for color 0

ncurses_attroff - Turn off the given attributes

ncurses_attron - Turn on the given attributes

ncurses_attrset - Set given attributes

ncurses_baudrate - Returns baudrate of terminal

ncurses_beep - Let the terminal beep

ncurses_bkgd - Set background property for terminal screen

ncurses_bkgdset - Control screen background

ncurses_border - Draw a border around the screen using attributed characters

ncurses_bottom_panel - Moves a visible panel to the bottom of the stack

ncurses_can_change_color - Checks if terminal color definitions can be changed

ncurses_cbreak - Switch of input buffering

ncurses_clear - Clear screen

ncurses_clrtobot - Clear screen from current position to bottom

ncurses_clrtoeol - Clear screen from current position to end of line

ncurses_color_content - Retrieves RGB components of a color

ncurses_color_set - Set active foreground and background colors

ncurses_curs_set - Set cursor state

ncurses_define_key - Define a keycode

ncurses_def_prog_mode - Saves terminals (program) mode

ncurses_def_shell_mode - Saves terminals (shell) mode

ncurses_delay_output - Delay output on terminal using padding characters

ncurses_delch - Delete character at current position, move rest of line left

ncurses_deleteln - Delete line at current position, move rest of screen up

ncurses_delwin - Delete a ncurses window

ncurses_del_panel - Remove panel from the stack and delete it (but not the associated window)

ncurses_doupdate - Write all prepared refreshes to terminal

ncurses_echo - Activate keyboard input echo

ncurses_echochar - Single character output including refresh

ncurses_end - Stop using ncurses, clean up the screen

ncurses_erase - Erase terminal screen

ncurses_erasechar - Returns current erase character

ncurses_filter - Set LINES for iniscr() and newterm() to 1

ncurses_flash - Flash terminal screen (visual bell)

ncurses_flushinp - Flush keyboard input buffer

ncurses_getch - Read a character from keyboard

ncurses_getmaxyx - Returns the size of a window

ncurses_getmouse - Reads mouse event

ncurses_getyx - Returns the current cursor position for a window

ncurses_halfdelay - Put terminal into halfdelay mode

ncurses_has_colors - Checks if terminal has color capabilities

ncurses_has_ic - Check for insert- and delete-capabilities

ncurses_has_il - Check for line insert- and delete-capabilities

ncurses_has_key - Check for presence of a function key on terminal keyboard

ncurses_hide_panel - Remove panel from the stack, making it invisible

ncurses_hline - Draw a horizontal line at current position using an attributed character and max. n characters long

ncurses_inch - Get character and attribute at current position

ncurses_init - Initialize ncurses

ncurses_init_color - Define a terminal color

ncurses_init_pair - Define a color pair

ncurses_insch - Insert character moving rest of line including character at current position

ncurses_insdelln - Insert lines before current line scrolling down (negative numbers delete and scroll up)

ncurses_insertln - Insert a line, move rest of screen down

ncurses_insstr - Insert string at current position, moving rest of line right

ncurses_instr - Reads string from terminal screen

ncurses_isendwin - Ncurses is in endwin mode, normal screen output may be performed

ncurses_keyok - Enable or disable a keycode

ncurses_keypad - Turns keypad on or off

ncurses_killchar - Returns current line kill character

ncurses_longname - Returns terminals description

ncurses_meta - Enables/Disable 8-bit meta key information

ncurses_mouseinterval - Set timeout for mouse button clicks

ncurses_mousemask - Sets mouse options

ncurses_mouse_trafo - Transforms coordinates

ncurses_move - Move output position

ncurses_move_panel - Moves a panel so that its upper-left corner is at [startx, starty]

ncurses_mvaddch - Move current position and add character

ncurses_mvaddchnstr - Move position and add attributed string with specified length

ncurses_mvaddchstr - Move position and add attributed string

ncurses_mvaddnstr - Move position and add string with specified length

ncurses_mvaddstr - Move position and add string

ncurses_mvcur - Move cursor immediately

ncurses_mvdelch - Move position and delete character, shift rest of line left

ncurses_mvgetch - Move position and get character at new position

ncurses_mvhline - Set new position and draw a horizontal line using an attributed character and max. n characters long

ncurses_mvinch - Move position and get attributed character at new position

ncurses_mvvline - Set new position and draw a vertical line using an attributed character and max. n characters long

ncurses_mvwaddstr - Add string at new position in window

ncurses_napms - Sleep

ncurses_newpad - Creates a new pad (window)

ncurses_newwin - Create a new window

ncurses_new_panel - Create a new panel and associate it with window

ncurses_nl - Translate newline and carriage return / line feed

ncurses_nocbreak - Switch terminal to cooked mode

ncurses_noecho - Switch off keyboard input echo

ncurses_nonl - Do not translate newline and carriage return / line feed

ncurses_noqiflush - Do not flush on signal characters

ncurses_noraw - Switch terminal out of raw mode

ncurses_pair_content - Retrieves foreground and background colors of a color pair

ncurses_panel_above - Returns the panel above panel

ncurses_panel_below - Returns the panel below panel

ncurses_panel_window - Returns the window associated with panel

ncurses_pnoutrefresh - Copies a region from a pad into the virtual screen

ncurses_prefresh - Copies a region from a pad into the virtual screen

ncurses_putp - Apply padding information to the string and output it

ncurses_qiflush - Flush on signal characters

ncurses_raw - Switch terminal into raw mode

ncurses_refresh - Refresh screen

ncurses_replace_panel - Replaces the window associated with panel

ncurses_resetty - Restores saved terminal state

ncurses_reset_prog_mode - Resets the prog mode saved by def_prog_mode

ncurses_reset_shell_mode - Resets the shell mode saved by def_shell_mode

ncurses_savetty - Saves terminal state

ncurses_scrl - Scroll window content up or down without changing current position

ncurses_scr_dump - Dump screen content to file

ncurses_scr_init - Initialize screen from file dump

ncurses_scr_restore - Restore screen from file dump

ncurses_scr_set - Inherit screen from file dump

ncurses_show_panel - Places an invisible panel on top of the stack, making it visible

ncurses_slk_attr - Returns current soft label key attribute

ncurses_slk_attroff - Turn off the given attributes for soft function-key labels

ncurses_slk_attron - Turn on the given attributes for soft function-key labels

ncurses_slk_attrset - Set given attributes for soft function-key labels

ncurses_slk_clear - Clears soft labels from screen

ncurses_slk_color - Sets color for soft label keys

ncurses_slk_init - Initializes soft label key functions

ncurses_slk_noutrefresh - Copies soft label keys to virtual screen

ncurses_slk_refresh - Copies soft label keys to screen

ncurses_slk_restore - Restores soft label keys

ncurses_slk_set - Sets function key labels

ncurses_slk_touch - Forces output when ncurses_slk_noutrefresh is performed

ncurses_start_color - Initializes color functionality

ncurses_termattrs - Returns a logical OR of all attribute flags supported by terminal

ncurses_termname - Returns terminals (short)-name

ncurses_timeout - Set timeout for special key sequences

ncurses_top_panel - Moves a visible panel to the top of the stack

ncurses_typeahead - Specify different filedescriptor for typeahead checking

ncurses_ungetch - Put a character back into the input stream

ncurses_ungetmouse - Pushes mouse event to queue

ncurses_update_panels - Refreshes the virtual screen to reflect the relations between panels in the stack

ncurses_use_default_colors - Assign terminal default colors to color id -1

ncurses_use_env - Control use of environment information about terminal size

ncurses_use_extended_names - Control use of extended names in terminfo descriptions

ncurses_vidattr - Display the string on the terminal in the video attribute mode

ncurses_vline - Draw a vertical line at current position using an attributed character and max. n characters long

ncurses_waddch - Adds character at current position in a window and advance cursor

ncurses_waddstr - Outputs text at current postion in window

ncurses_wattroff - Turns off attributes for a window

ncurses_wattron - Turns on attributes for a window

ncurses_wattrset - Set the attributes for a window

ncurses_wborder - Draws a border around the window using attributed characters

ncurses_wclear - Clears window

ncurses_wcolor_set - Sets windows color pairings

ncurses_werase - Erase window contents

ncurses_wgetch - Reads a character from keyboard (window)

ncurses_whline - Draws a horizontal line in a window at current position using an attributed character and max. n characters long

ncurses_wmouse_trafo - Transforms window/stdscr coordinates

ncurses_wmove - Moves windows output position

ncurses_wnoutrefresh - Copies window to virtual screen

ncurses_wrefresh - Refresh window on terminal screen

ncurses_wstandend - End standout mode for a window

ncurses_wstandout - Enter standout mode for a window

ncurses_wvline - Draws a vertical line in a window at current position using an attributed character and max. n characters long

« Mysqli
» NSAPI

PHP教程

PHP简介 PHP基本语法 PHP类型 PHP变量 PHP运算符 PHP控制结构 PHP函数 PHP类与对象 PHP异常处理函数库分类

PHPNcurses - 函数

ncurses_assume_default_colors

ncurses_can_change_color

ncurses_color_content

ncurses_color_set

ncurses_curs_set

ncurses_define_key

ncurses_def_prog_mode

ncurses_def_shell_mode

ncurses_mouseinterval

ncurses_replace_panel

ncurses_resetty

ncurses_reset_prog_mode

ncurses_reset_shell_mode

ncurses_slk_noutrefresh

ncurses_update_panels

ncurses_use_default_colors

ncurses_use_env

ncurses_use_extended_names

ncurses_wvline